Unlocking Instructions

IPHONE 2G / 3G / 3GS / 4 / 4S / 5 UNLOCKING INSTRUCTIONS
 

1. Please make sure that you are running the latest version of iTunes software on your computer. You can check it at http://www.apple.com/itunes/download

The next 2 steps are optional to unlock your iPhone, but these 2 steps will make sure that your iPhone is running the latest operating system software. If you do not have the original carrier SIM card or do not wish to update your firmware, please go to step 4.

2. If you've the SIM card from your original network (the network your iPhone is currently locked to), insert it. Connect your iPhone to your computer using the Dock Connector to USB cable provided with your iPhone.
 


 

3. Update your iPhone's software in iTunes (It's running the latest iPhone Operating System or iOS).
 


 

4. Insert a SIM card from a new service provider into your iPhone. It doesn't has to be a SIM card from the network you wish to unlock - it can be any valid SIM card from ANY network provider except the network your iPhone is currently locked to.
 


Inserting Sim - original iPhone


Inserting Sim - iPhone 3G & iPhone 3Gs


Inserting Sim - iPhone 4, iPhone 4s & iPhone 5
 

5. By inserting new SIM card, connect your iPhone to your computer and wait for iTunes to detect your phone.

6. Once it's been detected, disconnect the iPhone from your computer and wait for 20 seconds or so.

7. Reconnect your iPhone to your computer and wait for iTunes to detect it again.

8. Once your iPhone is detected for 2nd time, the process is completed and your iPhone will be unlocked. After searching for few seconds, you'll see your new carrier logo appear in the top left hand corner on the screen of your iPhone's. This unlock is permanent and you can update your iPhone's firmware at anytime.

If you wish to see the unlock screen below within iTunes to confirm this is an official unlock, simply perform a restore within iTunes and once your iPhone is restored you will be presented with the message "Congratulation's, your iPhone has been unlocked" once the restore has completed.
 

 
IPHONE 3G / 3GS / 4 / 4S / 5 PICTURE MESSAGING SETTINGS

This Guide is the easiest & fastest way to get Tmobile MMS working on iOS 6 for any iPhone including the iPhone 5, 4S, 4 & 3Gs all on 6.0 running on the T-mobile Network. Get the Text Below!

Go to Settings, General, Cellular, Cellular Data Network & Input this Info in the necessary slots.

1ST APN FIELD - APN: epc.tmobile.com

2ND APN FIELD - MMS APN: epc.tmobile.com

MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc

MMS Proxy: 216.155.165.50:8080

MMS Max Message Size: 1048546

MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf

Now just go to the Messages Tab in Settings, Enable MMS & That’s It! You are done, Enjoy the MMS!

 
Blackberry Unlocking Instructions:
How To Enter Unlock Code for Blackberry 9850, 9860, 9900, 9930:

1. Go to Options/Device/Advanced System Settings/Sim Card 
2. Type the letters "mepd" (without the quotes, you will not see anything on the screen when typing)
3. Once you see the Personalization Screen Hold the "alt" key and type "mep2" (without the quotes, you will not see anything on the screen when typing)
4. Enter unlock code when prompted
5. Your blackberry is now unlocked

 


 

How To Enter Unlock Code for Blackberry 9810:

1. Go to Options/Device/Advanced System Settings/Sim Card 
2. Slide the physical keyboard out.
3. Type the letters "mepd" (without the quotes, you will not see anything on the screen when typing)
4. Once you see the Personalization Screen Hold the "alt" key and type "mep2" (without the quotes, you will not see anything on the screen when typing)
5. Enter unlock code when prompted
6. Your blackberry is now unlocked

 


 

How To Enter Unlock Code for Blackberry 9800:

1. Go to Options/Device/Advanced System Settings/Sim Card 
2. Slide the physical keyboard out.
3. Type the letters "mepd" (without the quotes, you will not see anything on the screen when typing)
4. Once you see the Personalization Screen type "mep [alt] 2" (without the quotes, you will not see anything on the screen when typing)
5. Enter unlock code when prompted
6. Your phone is now unlocked

 


How To Enter Unlock Code for Blackberry 9700, Curve 9300, Bold 9000, Bold 9650, 9630 Tour, 8900 Javelin, 8520 Curve, 8800, 8820, 8300, 8310, and 8320 Curve:

 

1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from TechMajesty.com and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked

 


 

How To Enter Unlock Code for Blackberry 9780:

1. Go to Options/Device/Advanced System Settings/Sim Card 
2. Type the letters "mepd" (without the quotes, you will not see anything on the screen when typing)
3. Once you see the Personalization Screen type "mep [alt] 2" (without the quotes, you will not see anything on the screen when typing)
4. Enter code when prompted
5. Your phone is now unlocked

 


How To Enter Unlock Code for Bell Blackberry 9700:

 

1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the MEP Unlock Code received from TechMajesty.com and press in the trackpad to confirm
6. You will get a message CODE ACCEPTED and the phone will return to the "Personalization" screen
7. Type MEP [ALT BUTTON] 4 and you will be prompted to enter the Service Provider Code (SP Code)
8. Enter the SP Code sent to you by TechMajesty.com and press the trackpad
9. Your phone is unlocked.

 


How To Enter Unlock Code for Telus Blackberry 9700:

 

1. Go to settings menu => and then Options

2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 4 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Service Provider Code". Type in the Unlock Code received from TechMajesty.com and press in the trackpad to confirm
6. You will get a message CODE ACCEPTED and the phone will return to the "Personalization" screen
7. Your phone is now unlocked.

 


How To Enter Unlock Code for Vodafone BlackBerry Storm:

 

Tip: Turn the phone sideways so you get the full qwerty keypad
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keybord
7. Enter mepd (you will not be able to see the typed info)
8. Enter mep2
9. Now it will say enter network mep code
10. Enter the Unlock Code we gave you and press Enter
11. Your phone is now unlocked

 


How To Enter Unlock Code for Verizon BlackBerry Storm 9530 & Storm 2 9550:

 

Tip: Turn the phone sideways so you get the full qwerty keypad
1. Ensure the SIM Card thatcame pre-installed in the 9530 is inserted (can also be unlocked with any Sim card)
2. Go to 'Manage Connections'
3. Click on 'Turn All Connections Off'
4. Go to 'Options'
5. Go back to 'Options'
6. Click on 'Advanced Options'
7. Click on 'SIM Card'
8. Type 'MEPD' (letters will not appear on-screen but a menu will pop up)
9. Type 'MEP2' (user will be prompted to enter MEP code)
10. Enter the unlock code (for example '1234567890123456')
11. Reboot device
12. Go to 'Manage Connections'
13. Click on 'Restore Connections'
14. Device is now unlocked

 


How To Enter Unlock Code for Blackberry Pearl 8100, 8110, 8120, 8200, 8210, 8220, 9100, and 9105:

 

1 Insert SIM into device 
2 Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT. 
3 Select "Options" THEN SELECT ADVANCED OPTIONS
4 Scroll down and select "SIM Card" 
5 Type "MEPPD" (please note that you will not see what you type on the screen)
6 Type "MEPP then [ALT BUTTON] then 2" (please note that you will not see what you type on the screen)
7 Enter the Unlock Code 
8 Press enter 
9 Reboot device. Device is now unlocked.

 


 

Blackberry 8700, 8700c, and 8700g Unlock Code Entry Instructions:

***** You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! ***** 
1. Go to settings 
2. Go to options 
3. Go to advanced options 
4. Go to sim card 
5. Type MEPD (not case sensitive) (you will not see text appear on screen while typing) 
6. Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing) 
7. It will say "Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm. 
8. Your phone is now unlocked

 


How to Enter Unlock Codes for Blackberry 71xx, 72xx, and 79xx Series Blackberrys:

 

1. Select Options menu on BB. 
2. Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code) 
3. Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'. 
4. Usually you should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.) 
Here you must enter the "NET Unlock Code" that we gave you.

We recommend doing a Battery pull after unlocking your Blackberry.

 
HTC/ SAMSUNG UNLOCKING INSTRUCTION
1. Turn off the phone
 
2. Put in a non accepted(other then AT&T CARRIER) sim card.
 
3. Turn on phone
4. You will be promted to enter the unlock code
 
5. Enter the unlock code we sent you via email
 
6. YOUR PHONE IS UNLOCKED!!!